Adjustable ridge plough is suitable for the ridging after the plowing, It can match the tractor, the structure is simple, the height and width of the ridging can be adjusted.
Compact design and auto tube feed. Driving part fully-closed. Tube washing and feeding marking identification, filling, folding, sealing, code printing and finished product output all conducted by a fully auto control system. Tube washing and feeding cond
The trolley type resistance furnace adopts a composite fiber thermal insulation structure, which saves about 30% energy than the ordinary brick furnace lining structure. The trolley and furnace door are sealed by flexible sealing and pneumatic auxiliary c
The Cover of the Solid wall wiring duct is flush with the side of the duct for increased wire capacity and allows for tight, side by side duct placement.
This series of C frame hydraulic press is a multi-functional small and medium-sized hydraulic press, suitable for shaft parts, profile correction and shaft press-fitting.
Mini turning and milling cnc machine tool, it is complex machine,can finished all program one time locking, Here is CX40 mini cnc turning and milling machine description.
With three Z axis and three spindles, can process three workpieces at the same time, the machine has a switch, you can turn on one spindle, you can also turn on two spindles for simultaneous operation. Helpful to increase working efficiency.
The equipment is mainly used to transport overweight non-detachable large pieces, such as large excavators, bulldozers, road rollers, engineering equipment and so on.
Marvel Series fiber laser cutting machine with the world leading technology in laser cutting industry is the mature product manufactured by “HGLASER”. Marvel Series is the first option in metal sheet processing industry owing to the strong capacity of met
Falling film evaporation is to add the liquid to the upper tube of the heating chamber of the falling film evaporator.Through the liquid distribution and film forming device,it is evenly distributed into the heat exchange tubes.
CCD-camera system, and movable print table to produce high-quality prints on flat material such as EL-foils, LGP panels, BFF-films, touch screens, membrane switches, flexible printed circuits and more.
1, Four unit sizes from 0.8 to 1.6 tons2, Fully run-tested with water in both heating and cooling modes3, Rotary compressors on all units4, Low installed cost